Panasonic PT 51DX80 - Manual (Page 5)

I nstallation
Installation
Television Location
This unit can be used as part of an entertainment center. Consult your dealer for
available options.
□ Avoid excessive sunlight or bright lights, including reflections.
□ Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure.
□ Fluorescent lighting may reduce remote control transmitting range.
□ Keep away from magnetic equipment, including motors, fans and externa! speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best
results:
□ Use 75-ohm coaxial shielded cables.
□ Use appropriate input and output connectors, that match your component connectors.
□ Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
Polarized plug
Cable / Antenna Connection
For proper reception, either a cable or antenna connection is required.
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
Cable Connection
Connect the cable supplied by your local cable company to ANT1
connection on back of television. Select cable mode and ANT1 in
SET UP menu under Prog Chan {Program Channels).
Note: A cable converter box may be required for proper reception.
Check with your local cable company for compatibility
requirements.
Antenna Connection
• For proper reception of VHF/UHF channels, an external antenna is required. For
best reception, an outdoor antenna is recommended.
• Connect home antenna to ANT1 connection on back of incoming cable from
television. Select TV mode and ANT1 in the SET UP menu Antenna
under Prog Chan.
Cable Mode is preset at the factory.
Antenna users must change to TV mode and
ANTI in the Set Up Menu under Prog Chan,