Power and sound controls continued, Changing audio modes, Bass and treble – Panasonic CQ3700EU User Manual
Page 6: Balance, Fader, Selecting auxiliary source, Power and sound controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/653593/6/background.png)
Power and Sound Controls
continued
Changing Audio Modes
Press SEL to switch the audio mode in the following order.
VOLUME
^
BASS
TREBLE
t
♦
FADER
^
BALANCE
Bass and Treble
Press SEL to select the BASS (TREBLE) mode. Press “VOL A" or “VOL
V" to increase or decrease the bass/treble response.
-3
-12 to 12
-12 to 12
Balance
Press SEL to select the BALANCE mode. Press “VOLA” or “VOLV” to
shift the sound volume to the right or left speakers.
BHl
P (5
BRi
1 to 15
Balance Center
Fader
Press SEL to select the FADER mode. Press “VOLA" or “VOLV" to
shift the sound volume to the front or rear speakers.
or R
1 to 15
Fader Center
CAUTION:
When changing sound volume level for the rear side speakers by
using FADER button of the wired remote control unit (CA-
RC3000EU), it may occur that a sudden change in volume from the
front side speakers. So, pay attention when you adjust the volume.
Note;
When a control mode (BASS/TRE/BALVFADE) is selected but no operation is made within 5 seconds (2
seconds at volume mode), the display will return to the normal operation (Radio, Tape) mode. In such a
case, press SEL again to select the next control mode.
Selecting Auxiliary Source
(D Press and hold MODE (AUX) for more than 2 seconds to select AUX
Input mode.
P J M v
u ^
©Connect the auxiliary equipment (any other appropriate equipment)
to the AUX IN Connector.
[Canceiing AUX Input mod^
Press MODE (AUX) to resume the previous mode.
CQ-3700EU