Initial time setting, Resetting the time, Selecting the clock display – Panasonic CQ3700EU User Manual
Page 12: Clock basics, The clock system is 12-hours.)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Clock Basics
(The clock system is 12-hours.)
f MEMORY I
Keep holding
\
1
[®
Initial Time Setting
0 Keep holding CLK until you have set the time,
" AM12:00 " blinks indicating the time setting mode is
activated.
To set hours, press "
To set minutes, press “
(Hold “
\<4
” or “
” to change numbers rapidly.)
0When you have set the time, release C L K .
Note: When the clock is not set yet, "AdJ" is displayed.
Resetting the Time
When you want to reset the time, repeat step0 to (g)above.
RANDOM
6
BAND
CLK LfiH
MODE
AUX
i\
VAN
V
Selecting the Clock Display
Press CLK to display alarm time.
After a few seconds, current time returns on display.
Note: The current time will display at all the time even the power of the
radio is turned off.
12
CQ-3700EU