Yamaha Foot Controller FC9 - Manual (Page 3)

INTRODUCTION
Thank you for purchasing the Yamaha FC9 foot controller.
While the FC9 can be used to control the volume of two
separate instruments, it also features an electronic volume
control circuit which makes CV control possible.
In order to properly understand the FC9’s features as well
as enjoy years of trouble free operation, please read this
manual carefully.
• CONTENTS__________________________
PRECAUTIONS............................................ 2
OPERATION OF THE FC9..............................3
POWER ...................................................... 5
REPLACING BATTERY...................................5
LABELLING BY FUNCTION........................... 7
BLOCK DIAGRAM ....................................... 7
SPECIFICATIONS.......................................... 8
PRECAUTIONS
Shocks and drops may damage the FC9, and can adversely affect its performance. Handle
carefully, and avoid rough treatment.
For AC operation, use of the PA-1, PA-1 B, or PA-3B AC adaptor is strongly recommended.
Other adaptors may differ in voltage and/or polarity, and could damage the FC9 when used.
When you won’t be using the FC9 for a extended period of time, make sure to remove the
battery to prevent the possibility of damage caused by battery leakage.
When plugs are inserted into inputs 1 and/or 2, the power is automatically turned on. Be sure
to unplug the inputs when the FC9 isn’t being used to conserve the battery.
When the ВАТТ indicator dims or doesn’t light, it’s time to replace the battery (006P/9V).
Refer to “Replacing Battery” on page 5.
Clean the FC9 with a soft cloth. Avoid using benzene, alcohol-based cleaners, or aerosol
cleaners at close range because they may permanently damage the finish.