Specifications, Frequency response, Crosstalk – Yamaha AM802 User Manual
Page 10: Total harmonic distortion, Input channel equalization (chi, Level meters, Clip indicators (ch1 — 6 input), Power requirement, Power consumption, Maximum output level
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIFICATIONS
Frequency Response
+1, -2 dB, 20 Hz — 20 kHz. 10 kohms, 0 dB (ST
OUT)
+1, -2 dB, 20 Hz — 20 kHz, 10 kohms, -10 dB'
(AUX SND 1 — 3), (REC OUT)
Crosstalk
-60 dB at 1 kHz, adjacent channel inputs.
-60 dB at 1 kHz, input to output.
Total Harmonic Distortion
Less than 0.05%, 20 Hz -
+10 dB
20 kHz, 10 kohms.
Input Channel Equalization (CHI
15 dB maximum boost or cut
HI: 10 kHz (shelving)
LO: 100 Hz (shelving)
-8)
Hum & Noise* (20 Hz — 20 kHz, Rs = 150
ohms, CHI — 6 Gain max.)
-122dB(CH1 — 6) equivalent input noise.
-90 dB (ST OUT) residual output noise.
-76 dB (76 dB S/N) at ST OUT, Master fader
nominal, all channel faders minimum.
-72 dB (72dB S/N) at ST OUT. Master fader
nominal, channel 1 — 6 faders nominal.
-88 dB (78 dB S/N) at AUX SND, all channel
AUX controls minimum.
-82 dB (72 dB S/N) at channel 1 — 6 faders
nominal, AUX controls nominal.
Level Meters
ST OUT L, R (0 = 0 dB)
Clip Indicators (CH1 — 6 input)
CLIP (red) lights when pre-fader signal is 3 dB
below clipping.
Power Requirement
Power requirements match local AC mains volt
age and frequency in area where sold.
Power Consumption
U.S. & Canadian Models: 12 watts
General Model: 15 watts
Maximum Output Level
+17.5 dB, 20 Hz — 20 kHz, 10 kohms, THD
0.2%
Dimensions (W x H x D)
354
X
98.5
X
301 mm
(13-15/16”
X
3-7/8”
X
11-7/8”)
Maximum Voltage Gain
62 dB CHI — 6 IN to ST OUT
CH7, 8 IN to ST OUT
CHI — 6 IN to AUX SND
CH7, 8 IN to AUX SND
AUX RTN to ST OUT
Weight
2.7 kg (5 lbs. 15 oz)
22 dB
58 dB
18 dB
32 dB
Measured with a -6 dB/octave LPF @ 12.7 kHz.
0 dB = 0.775 Vrms
-
8
-