Panasonic DMC-FS5 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advanced (Recording pictures)
■ Birthday/Name setting
1
Press A / T to select [AGE] or [NAME] and then press ►.
2
Press A / T to select [SET] and then press [MENU/SET].
3
Enter the birthday or name.
Birthday;
Select the items (year/month/day).
A / T :
Setting.
[MENU/SET]: Exit.
Name: For details on how to enter characters, read the [TITLE EDIT] section on P73.
• When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON],
• If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4
Press [MENU/SET] to finish.
■ To cancel [AGE] and [NAME]
Select the [OFF] setting in step
2
of the “Birthday/Name setting” procedure.
-w’ Note
•The age and name can be printed out using the “PHOTOfunSTUDIO-viewer-" bundled software
on the CD-ROM (supplied).
• If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON],
•The focus range becomes the same as macro mode. [5 cm (0.17 feet) (Wide)/50 cm (1.64 feet)
(Tele) to x] (DMC-FS5)/[5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to
r ]
(DMC-FS3)
•[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO400].
• If the camera is turned on with [8ABY1]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5 seconds, along with the current date and time.
• If the age is not properly displayed, check the clock and birthday settings.
•The birthday setting and name setting can be reset with [RESET],
•The initial setting for [AF MODE] is [[2[].
Select this when you want to take pictures of a pet such as a dog or a cat.
You can set your pet’s birthday and name. You can select to have these appear at the time
of playback, or have them stamped on the recorded image using [TEXT STAMP] (P74).
For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on P50.
. Note
•The initial setting for the AF assist lamp is [OFF].
•[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes ¡ISO800].
•The initial setting for [AF MODE] is f[-11.
• Refer to [BABY1]/[BABY2] for other information about this mode.
* •
Select this when you want to take pictures of sunset view. This allows you to take vivid
pictures of the red color of the sun.
Note
• ISO sensitivity is fixed to [ISO100],
VQT1M97
51