Panasonic DMC-FS5 - Manual (Page 17)

Preparation
Press [MENU/SET],
Press ◄/► to select the items (year, month,
day, hour, minute or display sequence), and
press A/V to set.
(A): Time at the home area
Time at the travel destination (P58)
tt ]: Cancel without setting the clock.
Press [MENU/SET] to set.
• After completing the clock settings, turn the camera off. ‘
Then turn the camera back on, switch to recording mode, and oheck that the display
reflects the settings that were performed.
• When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the “Changing the clock setting (In normal
picture mode)” procedure below.
1 Press [MENU/SET].
2 Press A/T to select [CLOCK SET].
3 Press ► and then perform steps 3 and 4 to set the clock.
4 Press [MENU/SET] to close the menu.
• You can also set the clock in the [SETUP] menu. (P21)
., Note
•The clock is displayed when [DISPLAY] is pressed several times during recording.
•When a fully charged battery has been inserted for more than 24 hours, charging of the built-in
battery for the clock is completed so the clock setting will be stored (in the camera) for at least
3 months even if the battery is removed. (If you insert a battery that is not sufficiently charged,
the length of time that the clock setting is stored may become less.)
•You can set the year from 2000 to 2099. The 24-hour system is used.
• If the clock is not set, the correct date cannot be printed when you stamp the date on the
pictures with [TEXT STAMP] (P74) or order a photo studio to print the pictures.
• If the clock is set, the correct date can be printed even if the date is not displayed on the screen
of the camera.
VQT1M97
17