Programming the home theater remote, Code known, Code unknown – Panasonic CT-27SF34 User Manual

Page 35: Infrared remote codes for specific components

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Programming the Home Theater Remote

The remote control can be set to control other manufacturers components, by utilizing the MODE SELECTION

BUTTONS for CABLE, DSS, VCR, RCVR (a Receiver or Amplifier), CD, LD, and AUX (for Cassette Players, Second
VCR or a DVD.)

Code Known

Use the following procedure for setting up the
remote control using the numerical buttons

when the component’s remote code is known.

m Determine the brand of the component.

f2l Identify the code(s) associated with the

brand from the infrared code index (see

following pages). Record all possible

codes.

Code From

Index Sheet

Confirm that the component is plugged
in and operating properly, then turn it
OFF.

[4] Press and hold the button, then

the

button so that both are

pressed at the same time for aCleast]

¿"seconds. All Mode buttons will

flash. Then let go of the buttons.

Press the appropriate Mode button

for the component. The pressed

button will illuminate steadily. All

other buttons will go out.

Enter the 3-digit code, by using the
Remote

Control

Keypad

“0”

through ”9” buttons. If a proper

code was entered, the Mode button
will blink twice then go out.

No;^litHe^,

remote||Js^„;Set

fo;^|the|

entered’^codel

Code Unknown

Use the following procedure for setting up the
remote control when the component’s remote

access code is not known. This procedure

uses the ’’sequence method”.

m Confirm that the component is plugged

in and operating properly, then turn it

OFF.

\T\

Press the button to test the remote. If

the

correct

code

setup

for

the

component (in step [H]), the component

will turn on.

NOTE: Some brands have multiple codes.

Repeat the procedure using another
listed

code

until

the

component

responds correctly.

EUR511061

Press and hold the

button,

then the button so that both
are pressed at the same time for at

le^MSfseco^s. All Mode buttons

will flash. Then let go of the buttons.

Press the appropriate Mode button

for the device. The pressed button

will illuminate steadily. All other

buttons will go out.

IHI Press the ^ button to step

over to the next code.

Press the button to test the

remote. If the correct code is
sent, the component will turn on.

Once the correct code is found,

the

button

press

to store the code.

Repeat from step ® above until the

proper component code is found. It
may take several attempts before
the correct code is found.

NOTE: If an incorrect code is entered, or

when

the

operation

not

completed within 30 seconds, the
settings will not change.

Infrared Remote Codes for Specific Components

He/pfut Hint:

Write down the code numbers for your components in the space provided below. This
will serve as a handy reference whenever you need to reprogram your remote control.

CABLE

Cable TV Converter Box

VCR

Video Cassette Recorder

Compact Disc Player

DSS

Digital Satellite System

RCVR

Receiver or Amplifier

Laser Disc Player

□

Other Component

I C№er Component

II Other Component

II Other Component |

- 3 5 -