Panasonic CT-27SF34 - Manual (Page 25)

Input Select
Antenna Input Selection — This feature is
used to select Ant 1 or Ant 2 Operation.
1. Press .
2. Press ^ or W and ^ or ^ to highlight the Input
Select Icon.
3 Press to display the Input Select Menu.
4. Press ^ or ^ to highlight ANTENNA.
5. Press or ^ to select ANT 1 or ANT 2.
6. Presses twice to exit menus.
Main (Picture) input Seiection - This
feature is used to select TV Mode Operation or one of
three Video Inputs for the Main Picture (used with optional
accessory Video equipment).
1. Press fessij).
2. Press A or W and or ^ to highlight the Input
Select Icon.
3. Press to display the Input Select Menu.
INPUT
SELECT
2
4; Press or ^ to select TV, Video 1, Video 2 or Video
3 for Main Picture Input.
5. Press twice to exit menus.
PIP Input Selection — This feature Is used to
select TV Mode Operation or one of three Video Inputs for
the PIP (Picture in Picture) frame when the PIP frame is
displayed (used with optional accessory Video equipment).
1. Press .
2. Press ^ or and or ^ to highlight the Input
Select Icon.
3. Press to display the Input Select Menu.
4. Press ^ or ^ (when the PIP frame is displayed) to
highlight “PIP".
5. Press or ^ to select TV, Video 1, Video 2 or Video
3 for the PIP frame Input.
6. Press fcssj) twice to exit menus.
Timer Feature
Sleep Timer — This feature is used for automatic
turn OFF in 30, 60 or 90 minutes as desired.
NOTE: Display will flash 3,2 and 1 to indicate the last three
remaining minutes prior to turn OFF. To deactivate,
press ^ or ^ until “NO" is displayed.
1. Press
2. Press ^ or ^ and ^ or ^ to highlight the Timer
Icon.
3. Press to display the Timer Control Menu.
4.
Sleep Timer to be activated.
5. Press twice to exit menus.
NOTE: To deactivate Sleep Timer repeat steps 1 through
4. In step 4, select “NO” instead of minutes.
Timer Control is not available when Auto Power
On is set.
- 2 5 -