Note, Tape playback – Panasonic RQ-V153 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

AM
The sensitive ferrite core antenna inside the set will
provide excellent AM reception in most areas. For
optimum reception, turn the set in the direction which
gives the best results, since the ferrite core antenna
is directional.
Note:
Be sure to have the set in an upright position when
you listen to AM broadcasts. If you use the radio in a
horizontal position, it may not function adequately.
TAPE PLAYBACK
1. Open the Cassette Compartment Cover with your
hand, insert a cassette, ("fto [
b
])
2. Connect the included stereo earphones to the
0
Jack.
3. Set the SELECTOR Switch to “TAPE
4. Set the TAPE Selector according to the tape
used.
Cr02|MTL|: Meta! and chromium type.
NOR; Normal type.
5. Press the PLAY Button and playback will begin.
6. Adjust the VOLUME Control.
7.
To stop the playback, press the STOP Button.
•The unit is not turned off if the SELECTOR Switch is
set to “RADIO". It must be set to "TAPE fo^”.
Precaution for Listening with the Headphones
•Do not play your headset at a high volume.
Hearing experts advise against continuous ex
tended play.
•If you experience a ringing in your ears, reduce
volume or discontinue use.
•Do not use while operating a motorized vehicle.
It may create a traffic hazard and is illegal in
may areas.
•You should use extreme caution or temporarily
discontinue use In potentially hazardous situa
tions.
•Even if your headset is an open-air type
designed to let you hear outside sounds, don’t
tur/i up the volume so high that you can’t hear
what’s around you.