Panasonic TOUGHBOOK CF-37 - Manual (Page 11)

7
Setup Windows 95
(T) Select settings for your region, then press [Next].
X note >
Moving the cursor (i^) or clicking buttons can be performed with the touch
^ pad, a key or the touchscreen. (c>page 13, "Touchscreen")__________ ^
(D Select your keyboard layout, then press [Next],
(for U.S.A.: United States 101)
@ Enter your name and your company’s name, then press [Next].
(It is possible to omit the company name item.)
The License Agreement will be displayed.
After reading the agreement, select |1 accept the agreement] or [1 don’t accept
the agreement), then press [Next],
X note )-------------------------------------------------------------------------------------------------- ,
If [I accept the agreement] is selected, the (Certificate of Authenticity] will appear. If [I
don't accept the agreement] is selected, the Windows setup will be aborted.
(X) Input the Product ID written down in the “Customer’s Record” section,
d) Press [Finish].
(T) Input the correct date, time and time zone and press [Close].
You can also complete these settings at a later time.
(s) Press [Next] to complete the printer setup or [Cancel] to skip.
ЛИ21Е>
I Follow the c Follow the on-screen instructions. You can complete these settings at a later time.
_________________________________________________________ ✓
( 9 ) When the following screen is displayed, add the check mark depending on
your needs.
If this box is checked, it is possible to shorten the
start-up time from the computer OFF state and
the following occurs.
• The Windows Logo display (i.e., the cloud dis­
play) is not shown at start-up.
• The channel bar of Internet Explorer 4.0 is not
shown.
• No background paper is displayed.
• "Welcome” of Internet Explorer 4.0 is not shown.
• To display the start-up menu by pressing
(Ж) at start-up, it is necessary to press
slightly faster than normal.
Optinee Hibeeiihoh
ИймпчМг tv* b« iMt«.
] I ^ j ^ 11|^ ^ I
If this box is checked, the time to enter the hibernation mode and the time to
resume from the hibernation mode are shortened.
I You can con You can complete these settings at a later time. (C^ "Smart Boot")
1
Then, when the alignment of the touchscreen is needed, perform [Calibrate] in
[Start] - [Programs] - [Updd]. (C^ "Touchscreen" )
f This concludes the first-time use operation guidelines. )
11