Panasonic KX-E3000 User Manual

Page 43

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

You may add or delete tab stop positions within a stored form whenever necessary. It is important to remember that

you may only store

tab stops per form.

ADDING TAB STOP POSITIONS

Depress CODE+EXPR. to enter Forms Layout

Type the number, 1 or 2

Insert the form using auto insert

Depress TAB until you reach the stored tab stop closest to where you want to insert a new tab stop

NOTE: If the new tab stop is to be inserted between an existing tab stop and the right margin, move the printer

to the desired location.

If the new tab stop is to be inserted between the left margin and an existing tab stop, depress INDENT to

release the temporary margin and RETURN. Then move the printer to the desired location.

Depress TAB SET to set the new stop

Depress CODE+EXPR. to exit forms layout

NOTE: If you attempt to set an additional tab stop and hear 3 beeps, the typewriter is alerting you that the

maximum number of stops has been set.

CHANGING A STORED FORMAS LAYOUT