Panasonic KX-E3000 - Manual (Page 21)

You should now have iwo margin formats in memory. These formats will be recalled several times throughout the
Practice Exercises. To recall a margin format, you must do the following:
Move the MODE selector to NORMAL or AUTO
Depress CODE+Y
The first margin format has been recalled and is ready to use. If you had depressed CODE+Z, the second
format would have been brought to the writing line.
When you want to change any of the stored margin formats, simply set new margins and tabs and store over the
previous format.
Remember, you NEVER position the mode selector on STOR to recall margin formats from memory (only to store them).
ADJUSTABLE ‘^HOT ZONE*^
The '‘Hot Zone" represents the number of spaces between the bell and the right margin. It is pre-programmed for 0.7
of an inch (7 spaces in 10 pitch) from the right margin. You may change the setting to within one inch of the right
margin.
To change the setting:
Position the MODE selector to NORMAL
SPACE or TAB to the right margin
BACKSPACE to the new bell position
Depress CODE-VRIGHT MGN
RECALLING MARGIN FORMATS FROM MEMORY
15