Panasonic KX-E3000 - Manual (Page 24)

To cancel printed characters on previous lines:
EXPR. to the beginning of the current line
Depress BACKSPACE to position the printer on the line containing the error
This will advance the printer by line through the correction memory. If the printer is located at the beginning of
the line, depressing CANCEL f <3 ) advance the printer to the end of the previous line.
SPACE to position the printer one character to the right of the error
Depress CANCEL ( <^ ) to lift off the incorrect character(s) and.type the correction
Depress RELOC
NOTE: Once you have advanced into the correction memory, you may use RETURN to position the printer on
lines below the current line. If REVERSE INDEX f ^ ) is used to advance into previous lines, the
correction memory will be erased.
MAKING CORRECTIONS OUT OF THE CORRECTION MEMORY
When you have reached the end of the correction memory, you will hear 3 ''beeps". To correct characters above that
point:
Depress C0DE3^CANCEL ( <3 )
This instructs the typewriter that you are going to correct out of the 500 character memory. Your printer will
automatically move to the left margin to allow you to begin making corrections.
Depress REVERSE INDEX ( f )
To position the printer on the line of the error.
MAKING CORRECTIONS WITHIN THE CORRECTION MEMORY
18