If security indicator (bd is displayed, Will not start, Select your application – Panasonic TOUGHBOOK CF-47 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

If security indicator (BD is displayed,
you must first enter your User Password (
C?
"Security Measures")
Upon entering your User
Password and pressing
C Enter)
If the correct password is input.
Over three incorrect attempts,
ll ll
Will Start
Will Not Start*’
,^^Powero^
*' If you are stanitig from the suspend mode (Cr’
"Suspend / Hiber
nation Functions"), if after three attempts the correct password is not in
put. or if no password is entered for about a minute, the computer returns
to the suspend mode.
When an application or file that was previously displayed
appears on your screen,
the .suspend or hibernation mode (C^
"Suspend / Hibernation Functions")
has been set.
Select your application
You are able to start working on your computer.
^
note
)----------------------------------------------------
The power saving function is factory set, so if there is no input from a key, the
touch pad, or the external mouse for two minutes, the LCD is powered off (ECO
mode).
The LCD will resume operation when the touch pad or an external mouse (when
one is connected) is used or a key is pressed.
The power saving mode ([Power Scheme] in [Control Panel ] - [Power Manage
ment]) is factory set, so if there is no input from a key. the touch pad, or an
external mouse (when one is connected) for a certain interval of time, the power
to the LCD and hard disk is may be turned off (ECO mode). In addition, when
the computer is left alone, it automatically enters the suspend mode ((^ 'Manuai^
"Suspend/Hibernation Functions").
The LCD will resume operation when the touch pad or an external mou.se (when
one is connected) is used or a key is pressed.
[System Devices] in [Start] - [Settings] - [Control Panel] - [System] - [Device
Manager] may contain a device or devices bearing an exclamation mark or ques
tion mark. This does not indicate a malfunction. Such a mark (exclamation or
question mark) will not be displayed if the operating environment of the device
showing the mark is corrected, by for instance installing the driver of the device.
1 3