Tuning the tv set to the vcr, Helpful hint – Panasonic TC-26T1Z User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tuning the TV Set to the VCR
Push the VCR On/Off Button on the VCR to turn the VCR On
Set the "Tfest Signal ’ Switch to ''TEST'’ position or the VCR-
Push the MANU. D o w n B u t t o n or the TV flet^ the TV station
broadcasting on the UHF will be automatically tuned and memorized.
Confirm or the TV set that the received test pattern is as shown below.
Q 1
CH._
—I
UhfF
j P a n a s o n i c
TUHt
pi_
□
TUN£
X
UHF
Note:
This test pattern is used on the Panasonlotiational VCR only.
6
PRE.
Return the TV set to the normal operation mode by pushing this
button three times.
Helpful Hint
Set the Test Signai" switch to ‘Off’ on the VCR.
The TV Is now ready to receive the RF output signal from the VCR,
If you want the action name on the screen display together with programme position, for operation details,
refer to the Programme Name Writing operation on page 34 and 35.
33