Panasonic SL-PD347 - Manual (Page 11)

You can program up to 32 selections from the five discs in any order
as you desire.
Program Play
1 * 4 3 2
Before beginning, foliow steps 1-4 of “Basic Op­
erating Procedure” on page 7.
1 In the stop mode, press PROGRAM MODE to
iiiuminate the program play indicator.
1 2 3 4 5 /
n n
PGM. . .
/
nsc
1 1 ^
Lmf TRACK No.
Program play indicator
2 Press the desired disc button (1-5).
For example; ^
To select disc 3, press the 1 button.
Specified disc number
1 2 <3> 4
PGM . . .
5 J O I I
DISC f / (— TRACK No.
The R L indication shows that all the tracks on the disc are
selected. Skip steps 3 and 4 if you want to enter only the disc
number.
Press SKiP to seiect the track number.
For example:
To select the 9th track, press 9 times.
Specified track number
2 <3> 4
PGM . . .
' 3 3
DISC TMCX No.
4 Press PROGRAM MODE.
Program order
1 2 <3> 4 5 J
n
PGM . . .
Jl
DISC TRACK No.
To enter the 9th track successively:
1. Press .
2. Press Me.
3. Press PROGRAM MODE at this time.
5 Repeat steps 2, 3 and 4 until you have com­
pleted the desired entry.
• If you enter non-existing disc{s) or track(s) soon after the
loading drawer is closed or when it is open, the correspond­
ing indicator illuminates and the entry is included in the
count. In the play mode, the changer will cancel the non­
existing entry and play the subsequent programmed disc or
track.
• If you attempt a 33rd selection, the - ^ (full) indication will
be displayed.
6 Press PLAY to start play.
To enter additional selections during play, repeat steps 2, 3
and 4.
Play the changer with the loading drawer closed.
While the loading drawer is open, if next programmed selection is in
one of the other discs, the changer will stop after the current track
finishes playing.
11