Panasonic dvd-cp67 - Manual (Page 6)

Connection to a television
This page explains how to connect the unit to a television and
the powerful multi-channel audio found on DVDs, you should
Before connection
•Disconnect the AC power supply cord.
• Refer to the television's operating instructions.
set it up so you hear the audio through the television's speakers. To get the full benefit from
connect an amplifier and speakers (“ page 18).
Television
To household AC outlet
(AC 120 V, 60 Hz)
' AUDIO
IN
L
( O K
VIDEO ^
IN
R p @
T J
red white yellow
AC power
supply cord
(included)
Audio/video cable
(included)
The illustration shows
DVD-CP67 white yellow
Гг
DVD-CP67I
To enjoy progressive video
Connect to the component wdeo (480p) input terminals on a television
compatible with this unit's copy guard system, (Video will not be
displayed correctly if connected to an incompatible television.)
In QUICK SETUP, set "Progressive Out" to "Enable" (• page 7).
For your reference
All televisions manufactured by Panasonic arnf that have 480p input
connectors are compatible. Consult the manufacturer if you have
another brand of television.
Connect your unit directly to your television.
Do not connect the unit through your video cassette recorder when
setting up your home entertainment system, because the picture may
not be played correctly due to the copy guard.
S VIDEO OUT ternfiinal
The S-wdeo terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance (V)
signals. (Actual results depend on the television.) Television
S video cable
(not included)
S VIDEO
IN
.
When making this connection, ensure you connect the audio cables
to the corresponding audio input terminals on the television.
COMPONENT VIDEO OUT terminal
Connection using these terminals outputs the color difference
signals (P
b /P h ) and luminance signal (Y) separately in order to
achieve high fidelity in reproducing colors.
•The description of the component video input terminals depends
on the television or monitor (e.g. Y/P b /P r , Y/B-Y/R-Y, Y/C b /C r ).
Connect to terminals of the same color.
•After making this connection, change the black level tor a better
picture (• page 16, Video—Black Level Control).
•IDVD-CP67I
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S VIDEO OUT
terminal. Television
Video cable
(not included)
-CB=—
■T~ITt>~
COMPONENT
VIDEO IN
Y
-© P b
^(§) pR
When maldng this connection, ensure you connect the audio cables
to the corresponding audio input terminals on the television.
Conserving power
This unit consumes a small amount of power, even when it is turned off (approx, 2.5 W), To save power when the unit is not to be used for a long time,
unplug it from the household AC outlet.
Q The remote control
Batteries
•Insert so the poles {-f and —) match those in the remote control.
• Do not use rechargeable type batteries.
Do not:
•mix old and new batteries.
•use different types at the same time.
•heat or expose to flame.
•take apart or short drcuit,
•attempt to recharge alkaline or manganese batteries.
•use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of
time. Store in a cool, dark place.
■ Use
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m (23 feet)
directly in front of the unit.