Panasonic AUTO-LOGIC KX-F3500 - Manual (Page 43)

Speed Dialing and One-Touch Dialing
SPEED DIALING:
The unit allows keys "0” to “9” on the dial pad to be used for an additional 100 memory stations. These stations can then be
accessed by dialing two digits (“00" through “99"). Each station is capable of storing 30 digits.
ONE-TOUCH DIALING:
The unit is also equipped with ten One-Touch dialing stations (using the Direct Call buttons), each of which consists of two
locations: Telephone and FAX Number. Each location (Telephone/FAX No.) is capable of storing 30 digits.
Programming the Phone Numbers for Speed Dialing
•Be sure that the handset is on the cradle and that the
SP-PHONE button is off.
Push FUNCTION.
Enter the Station No. (00 to 99,2 digits).
(e.g. If the Station No. is 46.)
3
Enter the telephone number, then push
AUTO/MEMORY. (e.g. Phone number is 234-5678.)
•The display will show the entered telephone
number.
•To store phone numbers in succession, repeat
steps 2 and 3.
4
Push FUNCTION to end the operation.
You may also store FAX numbers into the
Speed Dial keys similarly.
Correcting an error white programming:
Push the STOP/CLEAR button instead of pushing the
AUTO/MEMORY button and then re-program the
correct number.
•The new entry will be cleared and the previous
storage will remain untouched.
To print out the stored phone number, see
page 1-17.
3-3