Recording ogm, Selecting the caller's recording time, 1 minute – Panasonic AUTO-LOGIC KX-F3500 User Manual
Page 29: Selecting the caller’s recording time -1, Preparing the answering machine
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To use the unit as an Answering Machine, you should first record an Outgoing Message (OGM).
•The purpose of the OGM is to answer the caller during your absence.
•To have calls answered automatically during your absence, set the unit to the Automatic Answer (AUTO ANS) mode.
•To record voice messages, select the recording time.
Preparing the Answering Machine
Recording OGM
See “Preparation-OGM Recording” on page 1-5.
Selecting the Caller's Recording Time
The Recording Time for Incoming Messages can be set to "VOX” or “1 minute”.
Be sure that the handset is on the cradle and that the SP-PHONE button is off.
The Recording time is preset to "VOX”.
1
Push FUNCTION.
2
Push REDiAL or MUTE until the following message
is displayed.
3 Push MODE if you wish to change.
•“VOX” and “1 MIN" are changed alternately each
time you push the MODE button.
PushAUTO/MEMORY.
•After pushing the AUTO/MEMORY button, you
may go directly to step 2, “Selecting the Remote
Code No. for Remote Operation" if you wish,
5
Push FUNCTION to end the operation.
VOX:
The unit will record an Incoming Message for as long
as the caller speaks.
1 Minute:
The unit will record an Incoming Message (ICM) up to
1 minute.
2-1