Turning on, The automatic answer mode from a remote phone, Notes – Panasonic AUTO-LOGIC KX-F3500 User Manual
Page 35: Playing back messages, Code no, Playing back messages -7, How to operate from a remote phone
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Operate from a Remote Phone
You can use a tone phone to listen your recorded Incoming Messages, from a remote phone.
Turning On
the Automatic Answer Mode
from a Remote Phone
If you forget to turn your unit to the Automatic Answer
mode before leaving your office, you may turn it on from a
remote location, using any telephone.
1
Call your unit and wait for 15 rings.
t
15 rings
•After 15 rings, the unit wiii switch to the
Automatic Answer mode.
2
After hearing the OGM or the beep tone, hang up.
r
J
•If the AUTO/FAX selector is set to “AUTO", the unit
will begin to play the OGM.
•If the AUTO/FAX selector is set to “FAX”, you will
hear several “beeps” (answering carrier tone of
your unit).
NOTES:
•If you hear nothing, record the OGM.
•The beep will be heard after the OGM.
1 beep: You may hang up.
6 beeps: The tape is full. Reset the tape. See
“Remote Reset of Tape” on page 2-9.
Playing Back Messages
1
Call your unit.
2
Push your code No. during the OGM.
—
Code No.
•A beep will sound, followed by other (up to 8)
beeps, which represent the number of recorded
messages.
•Another series of short beeps will be heard as the
ICM tape is rewinding and then your message will
be played.
Listen to messages.
4
Hang up the handset.
r
•Future Incoming Messages will be recorded after
the last message.
2-7