Panasonic CF-48 - Manual (Page 13)

insert the shutter-side
headfirst.
Create Backup Disks for reinstallation
Prepare 2HD floppy disks and make sure they are not in the write-protected state, then
select [Start] - [Programs] - [Panasonic] - [Create Backup Disk] and follow the on-screen
instructions. Place a label identifying the contents on each disk.
4wjnam2o.ooi
When [You do not need to make “BACKUP Disk’
a Backup Disk.
is displayed, there is no need to create
• Name of created backup disk
FIRSTAID FD (When the display for creating the UPDATE FD is shown, create the
disk by following the on-screen instructions.)
10
9 Store the disks in a safe place. They will enable you to return your computer to
close to the condition at the time of purchase should any problems occur.
When creating disks, do not run any other application program.
' • When creating disks and the message [Insufficient files to copy] is displayed, click
I
[OK] and then contact Panasonic Technical Support.
I • While the disk drive indicator is on, do not remove the disk, power down your ,
computer or use the standby or hibernation function (C^ “Standby/Hibema- •
; tion Functions”).
i • Be sure to create the Backup Disk, j
If a Backup Disk is not created, it will be impossible to return the computer to its ;
! original state. In this case, contact Panasonic Technical Support.
4wjHaQvvSI№i
Install the Acrobat® Reader 4.0
A note >
Acrobat® Reader is necessary to view the Reference Manual, which explains de­
tailed operational procedures concerning your computer.
(T) In [Start] - [Run], input [c:\util\reader\ar40eng.exe], then press [OK].
@ Press [Next],
@ After reading the “Software License Agreement”, select [Accept] if you agree to the
terms.
(4) Press [Next].
@ At the [Setup Complete], select [Yes, I want to restart my computer now], then select
[Finish].
( This concludes the first-time use operation guidelines. )
13