When using speakers under 6 o o, Press and hold center mode for 4 seconds, 0 insert the cover as shown in the illustration – Panasonic SA-AX6 User Manual
Page 17: 0 check that the cover now moves correctly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Bask operations
When using speakers under 6 O O
-—SPEAKERS---------- -
o o
■
V,
cow IMP
SPEAKERS
Press and hold
A
or B until LOW IMP lights up on
the display.
If even one of the speakers being used has an impedance under 6
n, press and hold down either button A or button B for 4 seconds or
more to set the impedance on the main unit to LOW.
{Press and hold down once again for 4 seconds or more to turn it
off.)
Note that when ‘'LOW IMP” is illuminated, speakers A and B cannot
both be used at the same time.
To change a speaker:
e.g. To use speaker B, press A goes out), and then press B to
activate speaker B.
To turn off the blue light
Turning off the blue light sometimes improves video viewing in dark
or dimly lit rooms.
Press and hold CENTER MODE for 4 seconds.
I
I
Press and hold it once again to turn the light back on.
a
This light comes on when the power is turned on.
If the front cover comes off @
0
Insert the cover as shown in the illustration.
0 Ensure the cover is parallel to the unit, then
press firmly down on the levers until they click
into place.
0 Check that the cover now moves correctly.
If it does not, remove it and repeat the above procedure.