If the tray does not eject automatically – Panasonic SQ-TC512F User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSERTING/REMOVING DISCS

If the tray does not eject automatically

Turn OFF your computer.

Open the front cover of the CD-

ROM Changer carefully.

Insert the eject pin.

1 Gently push the pin along the right

edge of the left slot until the pin

stops.

The tray will eject a little.

2 Pull the pin out and then push it

again about four times until the tray

is extended enough that you can pull
it out by hand.

Mechanism inside works as follows:

Along the Right

Edge of the Left

Slot

Eject Pin

Insert

the pin.

Push the pin

forward until

it stops.

Pull the

pin out

then push

it again.

Pull the tray the rest of the way by
hand.

(The tray currently in the play position

and the tray immediately below it can

both be pulled out by hand.)

Remove the disc from the tray and

turn ON your computer.

(This is to check, if the Changer returns

to normal position.)

Disc

If the CD-ROM Changer becomes Jammed, please contact our hotline for assistance.
(1-800-726-2797)