Leica Geosystems Leica mojoMINI 2 - User Manual - Manual (Page 92)

92 Leica mojoMINI 2, Troubleshooting
The mojoMINI 2 is
connected to the
GeoSpective 2 cable, and
pressing the standby
button has no effect. The mojoMINI 2 has not
been used for a long time,
and the battery is
completely discharged.
Power switch may be
turned off. Turn the vehicle ignition
key to the point that
provides power to the
cigarette lighter outlet.
The screen is dark. The brightness may be
turned down. Adjust the brightness.
The screen has been
exposed to extreme
temperature. Turn off, and disconnect
the screen. Leave the
device at room tempera-
ture for a few hours for
the LCD to recover.
When turned on, the
screen lights up, but does
not display the start
screen. Grey and white
vertical lines may be seen. The internal battery level is
very low and the device is
not connected to a stable
power source. Connect to power, and
allow the device to charge
before switching on.
Problem Possible Cause Possible Solution