Leica Geosystems Leica mojoMINI 2 - User Manual - Manual (Page 52)

52 Leica mojoMINI 2, Field Navigation
4.8 Field Boundaries
Overview By recording a field boundary the operator is able to determine accurately, how much
product is required for the field. This significantly reduces waste and problems
related to the disposal of excess product.
Recording a field
boundary To record a field boundary, carry out the following steps:
1. To set a field boundary go to the main field navigation screen and tap .
2. You will then have the option to set the boundary on the left wing of the imple-
ment, in the center where the GPS antenna is located or the right wing of the
implement. These three options are represented by the three buttons below:
3. Tap the button which is suits the current job you are doing.
a) Left implement tip
b) Antenna point
c)
Right implement tip
mojoMINI_2_011
a b c