Leica Geosystems Leica mojoMINI 2 - User Manual - Manual (Page 14)

14 Leica mojoMINI 2, System Installation
2.2 Installing the GeoSpective 2 Smart Antenna
Equipment
required The GeoSpective 2 smart antenna is a high-performance GPS receiver, which is used
in conjunction with the mojoMINI 2.
For installation and setup, you will need:
•
the GeoSpective 2 smart antenna;
• alcohol wipes;
• adhesive strips;
• a GeoSpective 2 cable, to connect the GeoSpective 2 smart antenna to the
vehicle’s cigarette lighter outlet and the mojoMINI 2.
ƽ
WARNING • If the power supply voltage is outside the specified range, the GeoSpective 2
smart antenna will not operate.
• If the power supply voltage exceeds +36 V DC, then the GeoSpective 2 smart
antenna may be permanently damaged. This damage is not covered by warranty.
Mounting require-
ments • When installing the GeoSpective 2 smart antenna, choose a location that has a
clear view of the sky, so that all satellites above the horizon can be tracked.
• Mount the GeoSpective 2 smart antenna on a secure, stable structure where it
will not present any danger. Most installations are on the tractor cab roof.