Leica Geosystems PlusDraw - Manual (Page 7)

4
For scenario 2 , once PlusDraw has been launched, a new sketch file will open ( Image 3 ). Begin
drawing.
For
scenario 3 , access the Bluetooth Manager ( Image 4 ) to scan for available devices and select
the DISTO unit ( Image 5 ).
Once the Bluetooth Manager is accessed for the device, a list of available connections will be
displayed. If the DISTO device is on and Bluetooth is active (Bluetooth symbol blinking), DISTO
will be an available connection. Simply select the DISTO to make the connection. The Bluetooth
symbol will stop flashing.
Once connected to the DISTO, a new sketch file will open (
Image 6 ). Begin drawing.
If the devices do not connect in any manner described above, PlusDraw will need to be
configured manually as described in the following section.
Select DISTO to make
the connection
Image 4 Image 5
Image 6