Leica Geosystems PlusDraw - Manual (Page 11)

8
Tab B: Comments View
This view will allow information about the sketch page to be entered. Any information can be
entered in the fields shown in
Image 14 ; however, their intended use is described below:
Tab C: Results View
This view will display calculation information gathered from measurement inputs.
Displays surface area.
Displays perimeter.
Displays wall height.
Displays wall surface area.
Displays cubic volume.
Note: If a wall height is not provided, wall surface area and volume will not be calculated. In
addition, calculations that display a tilde (~) indicate that the value has been rounded to the
nearest hundredths place.
n The first field is intended for the name (example: customer name,
property name).
n The second field is intended for the floor or level name (example:
first floor, second floor).
n The third field is intended for room name (example: kitchen,
bedroom 1, bedroom 2). If the field is left blank, the page number
will be inserted in the field automatica lly.
n The fourth field is intended for additional comments or
observations.
Image 14
Image 15
Image 15