Dynon Avionics FlightDEK-D180 Pilots Users Guide User Manual
Page 25
Available Pages
EFIS Main pages
Available in 1/3, 2/3 and full formats
The FlightDEK-D180 default screen rotation includes only 2/3
EFIS pages combined with the various EMS and HSI pages
described below. However, you may also choose screen
configurations that use 1/3 and full-screen pages. The 2/3 and
full-screen pages can display EFIS- and EMS-related info items
on the left and right side of the screen. You can enable any of the
non-default EFIS screens as described in the Changing the
Screen Rotation section on page 3-5. Some of the displayed
items described below may not be onscreen, depending on
whether or not they have been enabled in the CLUTTR menu.
Beginning with firmware revision 3.0, Dynon adopted a
dramatically different EFIS display format than it had previously
used. If your EFIS display does not resemble the layouts shown
at right, first ensure that you are using firmware version 3.0 or
higher. Then, ensure that the setting at EFIS > SETUP > STYLE
is set to MODERN. If you prefer the previous display style, you
can change this setting to CLASSIC. The classic display format
is documented in previous revisions of this manual, available on
Dynon Avionics’ website at
o further
development will occur on the classic display format.
The following sub-sections describe the displayed items in
detail.
4-2
FlightDEK-D180 Pilot’s User Guide