CANOGA PERKINS 1500 Domain Management Module - Manual (Page 33)

4. At the Virtual Group Management screen, make any of these selections:
• To add a module to a Virtual Group, type
1 , then at the prompt, enter the Chassis and
Slot for the module, and press .
• To delete a module from the selected Virtual Group, type
2 , then at the prompt, enter the
Chassis and Slot for the module, and press .
Note: The delete option in the Virtual Group Management menu deletes an entire Virtual
Group. To delete a single module in a Virtual Group, first select the Virtual Group, then
at the Virtual Group Management screen, select and delete that module.
• To reset all modules in the selected Virtual Group, type
r and press .
• To swap firmware banks in all modules in the selected Virtual Group, type
s and press
.
5. To return to the Main Menu, press ; any changes to groups are saved automatically.
Manage a Chassis
You can manage the modules within a chassis. You can view information, such as type, status,
software versions, or power consumption, about all modules in a single chassis. Use the Chassis
Management screen to view information about and status for each Chassis in the Domain and to
access specific modules within that chassis. To access the Chassis Management menu, follow
these steps:
1. At the Main Menu, type 3 , "Manage or access a specific Chassis" and press .
2. The chassis selection appears at the right of item 3; press to cycle through the
chassis that are online, then press to select a chassis. The Chassis Management
screen appears; it shows the module and status for each slot in the chassis. See Figure 7.
• To view the second screen with the rest of the slots, press .
• To view the Local and Remote Bootcode and Firmware, both Active and Inactive,
version numbers for all modules, type t . See Figure 8.
• To view the power consumption for each module and the total power still available for
additional modules in the chassis, type t again. See Figure 9.
• To choose a specific module from the list on the Chassis Management screen, press
to cycle through the slots to that module, then press ; the user interface
for that module appears. For details on the module, see the User Manual for that module.
3. To return to the Main Menu, press .
Model 1500 Domain Management Module 3-21