CANOGA PERKINS 1500 Domain Management Module - Manual (Page 52)

Domain Management Module, 3-4
Module, 3-23
System Configuration, 3-5
Virtual Group Management, 3-20
mibs
and system information, 3-6
required, 3-1
Modem/SLIP/PPP menu, 3-9
module
access user interface, 3-24
list and status, 3-21
reset and switch firmware, 3-24
Module Code Library, 3-19
Module Menu, 3-23
P
PC terminal connection, 3-1
PING Generation screen, 3-9
pinout, serial port, 4-1
power consumption
in chassis, 3-22
module, 3-21
power source, 2-1
R
Radius Client Configuration screen, 3-15
Radius client server values, 3-14
required mibs, 3-1
reset alarms
CIM Management screen, 3-23
System Status screen, 3-19
reset and switch firmware
DMM, 3-11
module, 3-24
reset module, 3-24
S
SBMC, 1-3
screen
Change Password, 3-15
Change Security & Passwords menu, 3-12
Chassis Management, 3-21
CIM Management, 3-23
Connected Sessions, 3-20
DMM Main Menu, 3-4
Domain Management Module menu, 3-4
Edit Host Access screen, 3-14
general format, 3-2
Modem/SLIP/PPP menu, 3-9
Module Menu, 3-23
organization and nesting, 3-3
PING Generation, 3-9
Radius Client Configuration, 3-15
Security Configuration screen, 3-12
Set Date and Time, 3-8, 3-9
SNTP Configuration, 3-8
Software Upgrade, 3-10
Syslog Configuration, 3-18
System Configuration, 3-5
System Log, 3-17
System Status, 3-19
Trap Notification/Destination Table, 3-15
Virtual Group Management, 3-20
security
general parameters, 3-12
lockout, 3-12
logout, 3-12
options and descriptions, 1-4
password characteristics, 3-12
Radius, 3-15
SNMPv3 for traps, 3-16
SNMPv3 parameters, 3-16
Security Configuration screen, 3-12
serial port pinout, 4-1
Set Date and Time screen, 3-8, 3-9
set up
terminal connection, 3-1
sideband management channel, 1-3
SIMM card functions, 1-2
SNMP, 3-14
for traps, 3-16
v3 parameters, 3-16
SNTP Configuration screen, 3-8