CANOGA PERKINS 9171 Metro Ethernet Routing Switch - Manual (Page 24)

9171 Installation Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Routing Switch Page 24 of 26

The power is normal.

The cable of configuration port (Console) is properly connected.
 If no problems have been found after the above checks, it is possible that configuration cable is
faulty or the parameter setting of terminal (such as super terminal) are incorrect, please check
accordingly.
 Troubleshooting for the terminal displaying hashes:
If the configuration terminal displays hashes, it is probable that the parameter setting of terminal (such as
super terminal) are incorrect Please confirm the parameter setting of terminal (such as super terminal): baud
rate: 9600, data bit: 8, parity: no, stop bit: 1, flow control: NA, selecting terminal emulation: VT100