C.R.Plastic Products B32 - Manual (Page 4)

Step 5: Flip assembled part of love seat over on to Right Arm (D), keeping bottom edge of seat flush with
bottom edge of center rail of arm. Keep front edge of seat back 1/8” from front of leg, (detail Y) and
attach with 5 - 1½” screws.
Step 6: Line up back and insert 2 - 2” screws to attach the back to the curved arm rest, (detail Z) keeping screw
holes centered on arm.
Step 7: Insert 4 - 1½” screws. (detail Z)
Figure 3
Required Qty
Right Arm (D) 1
1½” Screws 10
2” Screws
2
Keep front edge of seat
back 1/8” from the
front of leg.
Keep bottom edge of
seat flush with center
rail of arm.
Keep tight.
Use 1½” screws
Use 2” Screws
keeping screw
holes centered
on arm.
Z
Y