C.R.Plastic Products C34 - Manual (Page 2)

A. Seat Qty: 1 B. Back Qty: 1
C. Left Leg Qty: 1 D. Right Leg Qty: 1
E. Stringer Qty: 2
PARTS LIST:
A - Seat
B - Back
C - Left Leg
D - Right Leg
E - Stringer
HARDWARE LIST:
18 – 1½” Screws
4 – 2½” Screws
Note:

Read these instructions carefully before assembling.

Tools required: # 2 Phillips or #2 Robertson bit and power drill.

Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the plastic surfaces.

Two people might be required for assembly.

Caution!! Do not over tighten screws.