C. Crane ATS-909X User Manual

Page 37

HEADPHONE SOCKET

A 3.5mm stereo Headphone Socket is provided on the left hand

side of your radio for use with headphones. Inserting a plug

automatically mutes the internal loudspeaker.

AM RF GAIN

The distortion while listening to AM band can be reduced by

adjusting level of the incoming signal using the AM RF Gain control.

LCD DISPLAY LIGHT

Backlight button is used to illuminate the display when it becomes

too dark to see the display. The light will remain on approximately

12 seconds after initiated or will extinguish any other function

be activated.

If an AC adapter is being used the LCD display will be illuminated

continuously while the radio is in operation.

2. TIMER ACTIVATION (STANDBY OUT)

The jack is for use with a recorder that has a timer activated switch.

You would use this switch if you wanted to do a timed recording.

It is used in conjunction with the Line-out jack. See your recorder’s

instructions to determine if this function will work with your recorder.

Note:

The ATS-909X radio can trigger the above function for an hour.

Note:

If you don’t connect the standby out jack to your recorder for a

timed recording, you may turn on your recorder to record manually.