beautypg.com

Cisco 3620 User Manual

Page 10

background image

10 Installing a Fan-Speed Controller in Cisco 3620 Routers

Installing the Fan-Speed Controller

Figure 5

Attaching the Fan-Speed Controller Bracket to the Motherboard

Step 5

Position the fan-speed controller bracket so that the card is on the top side, and the holes
in the bracket and motherboard are aligned. (See Figure 5.)

Step 6

Secure the bracket to the motherboard with the screws removed in Step 2. (See Figure 5.)

Note

If you misplaced the previously removed screws, use the replacement screws

included with the fan-speed controller kit.

Note

Avoid stressing the fan and power supply cables when the bracket is secured.

13302

Fan-speed

controller

bracket with

card on top

Fan

connectors

Power supply

connectors