beautypg.com

Maintenance – Kidde KN-COEG-3 (900-0113) User Manual

Page 21

background image

7. Maintenance

Move the CO and Gas alarm to a remote location, to prevent possible
damage or contamination of the sensor, prior to performing any of the
following:

• Staining or stripping floors or furniture, painting or wall-papering

• Using aerosols or adhesives

WARNING: Reinstall the CO and Gas alarm as soon as possible to assure
continuous protection.

The following is a list of substances that at high levels can damage the
sensor or cause temporary readings that are not CO readings:

• Ethylene, ethanol, alcohol, iso-propanol, benzene, toluene, ethyl

acetate, hydrogen, hydrogen sulfide and sulfur dioxide.

• Also most aerosol sprays, alcohol based products, paint, thinner, sol-

vent, adhesive, hair spray, after shave, perfume, auto exhaust (cold
start) and some cleaning agents.

2509-7214-00.QXD:_ 2009.1.8 9:24 AM Page 21