Kidde i12080A - Manual

AC Wire-in Single and/or Multiple Station (up to 24 Devices) Ionization Smoke
Alarm with HUSH
TM Control to temporarily silence nuisance alarms.
Models i12040A and i12080A have a 9-Volt Battery Back Up and the model
i12080A has a battery powered safety light.
Thank you for purchasing this smoke alarm. It is an important part of your family’s
home safety plan. You can trust this product to provide the highest quality safety pro-
tection. We know you expect nothing less when the lives of your family are at stake.
Kidde alarms and accessories CAN ONLY BE interconnected with other Kidde alarms
and accessories as well as specified brands and models of interconnect compatible
alarms. Connection of Kidde products to a non-specified manufacturer’s interconnect
system, or connection with non-specified equipment from another manufacturer into
an existing Kidde system could result in nuisance alarming, failure to alarm, or dam-
age to one or all of the devices in the interconnect system. Refer to the User’s Guide
supplied with each Kidde product for interconnect compatible models, brands, and
devices. Refer to the wiring instructions in section 3 for NFPA initiating device limits.
For models:
i12020A, i12040A, i12080A
Manual P/N 820-1183 Rev.D
1220-7205-00
i12020A
i12040A
i12080A
For your convenience, write down the following information. If you call
our Consumer Hotline, these are the first questions you will be asked.
Smoke Alarm Model Number
(located on back of alarm):
Date Code (located on back of alarm): The
National Fire Protection Association (NFPA)
and the manufacturer recommend replacing
this alarm ten years from the date code.
Date of Purchase:
Where Purchased:
Smoke Alarm User’s Guide
SIGNALING
LISTED
UL
1220-7205-00(820-1183D-EN).qxd:_ 2010.9.3 7:04 PM Page 1