beautypg.com

Preparing your espresso machine, Using the control panel – Cuisinart EM-100 User Manual

Page 6

background image

pREpaRINg yOUR

ESpRESSO MaCHINE

1. Place the espresso machine on a dry,

stable countertop or other surface where you

will be using the machine.

Important: for first time use or if the machine

has not been used for some time, it is

important that the machine is rinsed as

follows:
2. Insert the power cord into a

power outlet. Press the

power button to turn the

espresso machine on (1).

The light located on the

power button will illuminate

red and the heating light will

also illuminate red; this

indicates that your espresso

machine is on and is heating

up. When the heating light

switches off, this indicates

that the espresso machine is heated and

ready to use (2).

3. Make sure that the drip tray and grate are

in place.

4. To fill the espresso machine

with water. Simply lift the lid

of the water reservoir at the

top of the espresso machine

(3) or fill with fresh cold

water or filtered water (4).

5. Place cups on the warming

plate (5).

6. Fit the portafilter handle with

either the one or two cup or

pod filter basket (6). Secure

the portafilter handle to the

brew head (7-8).

7. Place a sufficiently large

container under both pouring

spouts (9).

8. Turn the function knob to

the

espresso setting (10)

and allow the water to run

through until the water

reservoir is empty.

USINg THE

CONTROL paNEL

power

NOTE: Before turning on the espresso machine,

make sure that the function knob is in the off

position.
Press the power button to turn the espresso

machine on. The light located on the power

switch will illuminate red and the heating light

will illuminate red; this is to indicate that your

espresso machine is on and is heating up.

The espresso machine will automatically adjust

the temperature of the heating system to the

espresso temperature. When the machine is

heated and ready to use, the red heating light

will go out.

NOTE: To turn the espresso machine off, simply

press the power button.
Espresso

When the machine’s heating system has

reached the correct temperature so that the red

heating light is off, you can use the espresso

machine. Simply turn the function knob

clockwise to the espresso setting

to start the

pour and turn it back to the off position to stop.

1

2

3

4

5

6

7

8

9

10