Cleveland Range Steam Oven User Manual
Page 6
6
TO CONNECT USB CONVERTER TO RS485 ONLY
IMPORTANT:
ALWAYS USE THE SAME USB PORT WHEN REATTACHING THE USB CABLE TO THE PC!
See Page 20 for instructions for USB hardware and software installation and setup.
The USB software must be installed on the PC before using the USB adapter.
Photos 9, 10, and 11 shows the correct USB cable connections from the PC to the
Converter in Photo 12.
Note the position of the Dongle on the PC in Photo 11.
Photo 9
Photo 10
Photo 11
Photo 12
PHOTO 12 SHOWS WIRE
CONNECTIONS PIN 1, PIN 2,
AND GROUND (PIN 6).