Directions for installing the usb adapter – Cleveland Range Steam Oven User Manual
Page 17
17
Directions for Installing the USB Adapter
1. Plug the USB connector into the adapter and connect to one of the USB ports on
the back of your computer.
2. Install the USB drivers onto your computer using the CD provided in the kit.
3. Follow the instructions that are on the CD to configure the COM ports so the
computer can recognize the USB adapter.(See configuration pages for data
speeds and other settings)
4. Configure the USB for COM 2-4 only. The PC-HACCP will only recognize those
COM ports.
5. Record which COM port the USB is connected to and always plug the adapter
into that port when using the PC-HACCP controls.
Select “No not at this time.”