Cleveland Range Steam Oven User Manual
Page 29
29
Jumper #1 Position
SHOWS WIRE CONNECTIONS PIN 1, PIN 2, AND GROUND (PIN 6).
7. For the adapter to output data for RS485, a jumper inside the metal case must be
positioned correctly. This photo shows the position of the #1 jumper. All other
jumpers should be in the original position.
8. Place the metal cover back on the adapter and secure the screws.
9. The adapter is now ready for use with the PC-HACCP.
Place
connect
jumper #1
See also other documents in the category Cleveland Range Kiln:
- Steam Cooker and Rethermalization Unit 22CET3A (46 pages)
- CCTT-20 (2 pages)
- OEB-10.10 (2 pages)
- Convotherm OES-6.20 (2 pages)
- Convotherm OEB-20.10 (2 pages)
- CUPR-620 (2 pages)
- Enodis OGB-10.10 (2 pages)
- CTC-1220 (2 pages)
- OGB-6.20 (101 pages)
- Convotherm OES-10.10 (2 pages)
- Convotherm OEB- 6.10 (2 pages)
- CSTK-610CA (8 pages)
- SteamChef 22CGT6 (30 pages)
- OGS-10.20 (2 pages)
- OGS-20.20 (2 pages)
- OEB-10.20 (2 pages)
- OEB-6.20 (2 pages)
- Convotherm OES-10.20 (2 pages)
- OES-3.10 (2 pages)
- PC-HACCP-MU (1 page)
- CST 08-0B (2 pages)
- ELECTRIC 20.20 OEB-20.20 (74 pages)
- OGS-6.20 (2 pages)
- Enodis 24-CDM (2 pages)
- SteamChef 22CGT3 (27 pages)
- Enodis CR-32 (4 pages)
- OGB-20.10 (2 pages)
- OVEN STEAMER (94 pages)
- Enodis OGB-20.20 (2 pages)
- Enodis OES-20.20 (2 pages)
- OGB-6.10 (2 pages)
- Convotherm OES-20.10 (2 pages)
- C9797-K2PF (2 pages)
- 24-CGM-200 (2 pages)