Sangean PR-D14USB (R1) - Manual (Page 18)

7
Sleep timer
Your radio can be set to turn off automatically after a preset time
has elapsed. The sleep timer setting can be adjusted between 5,
30, 45, 60, 90 and 0 minutes.
. Press and hold the Standby button to enter the Sleep timer setting.
‘SLEEP XX’ will show on the display.
. Keep pressing the Standby button and the Sleep timer options
will start switching on the display. Stop until the required Sleep
timer setting appears on the display. The setting will be saved
and the LCD will return to normal display.
3. Your radio switch off automatically after the preset sleep timer has
elapsed. The sleep timer icon will show on the display indicating
an active Sleep timer.
4. To cancel the sleep timer function before the preset time has
elapsed, simply press and release the Standby button to turn the
unit off manually.
Display backlight
. Press and hold the Menu / Info button.
. Press Tuning Up / Down button until ‘LIGHT OFF’ shown on the
display.
3. Press the Scan button to enter the setting and then press the
Tuning Up / Down button to select the required option. If light on
is selected, the display backlight will illuminate all the time; whereas
light off is selected, the display backlight will illuminate only for
10 seconds .Press Scan to confirm the setting.
Note: Display backlight option is not available when the unit is
powered supplied with battery.