Sangean PR-D14USB (R1) User Manual
Page 17
6
GB
When the alarm sounds
To cancel a sounding alarm, press the Standby button.
When the buzzer alarm activates, the alarm will start softly and
gradually increase in level. It will sound for minute and silence for
minute in repetition for 60 minutes unless cancelled. The radio
will sound non-stop at the selected time for up to 60 minutes for
other alarm types.
Disabling / cancelling alarms
To disable an active alarm, either press and release the Standby
button, or press and hold the corresponding alarm button to cancel
the alarm.
Snooze
. When the alarm sounds, press any button other than the Standby
button will silence the alarm for 5 minutes. The symbol for snooze
will appear on the display.
. To adjust the silence time for the snooze timer, press and hold
the Info / menu button to enter the menu setting.
3. Press the Tuning Up / Down until ‘SNOOZE X’ appears on the
display, then press and release the Scan button to enter the
setting. Press the Tuning Up / Down to adjust the silence time
from 5, 0, 5 and 0 minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is suspended, press
and release the Standby button.