Sangean DDR-62 (V1) - Manual (Page 92)

9
Touch panel sensitivity control
The sensitivity of the touch panel may be adjusted. The default setting will normally be found
to provide satisfactory operation, however, the touch panel system may respond differently
depending upon the moisture of the skin. The touch panel sensitivity may be set to low, normal or
high.
. Access the menu for the current mode by pressing and holding the Menu button.
2. Press the Folder Up or Down buttons until 'System settings' is highlighted on the display. Press
the Select button to enter the system settings menu.
. Press the Folder Up or Down button until 'Touch pad set' is highlighted on the display. Press
the Select button to enter the adjustment mode.
. Press the Folder Up or Down buttons to highlight the desired touch panel sensitivity level.
5. Press and release the Select button to save the new setting.
The default setting after a system reset is Normal.