Sangean DDR-62 (V1) - Manual (Page 62)

6
4. To stop play, press the Stop button. The total number of CD tracks and the stop symbol (■) will
be displayed. If you put the unit into standby mode without pressing the Stop button, then the
next time the unit is switched on it will return to the previously played track.
5. To take out the CD, press the CD Eject button. The display will show 'Eject'. In order to protect
the disc if it is not removed, the unit will reload the CD after 0 seconds and then enter standby
mode.
Selecting a track
. While the CD is playing, press either the Fast-forward or Rewind buttons to change to the
desired track. The updated track number is shown in the display.
2. You can also skip tracks when the player is paused or stopped. Skip to the desired track using
the Fast-forward or Rewind button, release the button when the desired track is displayed.
. Press the Play / Pause button to play the selected track.
Selecting a desired track
. For track numbers -9 simply press the corresponding digit button. For track numbers ten and
above press the required digits using the 0/0 button to enter the digit zero.
2. If the track number entered exceeds the number of tracks on the CD, then the last track on the
CD will be played.