Recording mp3 / wma files from cd / sd / usb – Sangean DDR-62 (V1) User Manual
Page 75
7
GB
Recording MP3 / WMA files from CD / SD / USB
In addition to recording from conventional sources, the DDR-62 radio can also record from MP
or WMA files that have previously been written to CD, SD or USB media. In this case the files are
copied rather than re-encoded to MP3 in order to avoid a reduction in quality. You may copy files
from CD or SD to USB and from CD or USB to SD.
Select the desired source for the recording (SD, USB or CD).
Press the Play button to start playing the source media (if it does not automatically start). Set
the volume to the required listening level (the volume of the recording will not be affected by
this).
Insert the media that the files will be recorded on to (SD or USB).
Press the Record button. The display will show "Record initial...".
If only one media type is present, the audio will stop while the source media is taken back to
the beginning of the current file. Recording will then start.
If both SD and USB media are detected, then the radio will default to the option previously set.
The default media option is accessed through the 'System settings' menu then by selecting
'Rec default dest.'. Select 'SD card' or 'USB' memory as needed. The source media will be
taken back to the beginning of the current file and recording will then start.
In order to stop the recording press the Record button once more. Recording and playback will
stop and all files that have been played will have been copied to the storage media.
.
2.
.
.
5.
6.
7.