FaxBack Fax Machine Integration Server - AudioCodes MP202 - Manual (Page 8)

Fax Machine Integration Server Installation Guide — Page 8
Configuring an AudioCodes MP202
To configure an MP202, you will need a computer whose network interface is configured for DHCP Also have the latest
MP202 firmware file downloaded and available on the computer
First, connect the computer’s Ethernet cable to the MP202’s LAN port on the back of the device Also connect the power
When the computer has received a DHCP lease, open a web browser and go to http://192.168.2.1/ The device will prompt
for you to configure the default language and to set an initial user name and password Please note that both the user name and the
password are case-sensitive Record the user name and password you have assigned for later use
Once you have assigned a user name and password, you will see the Quick Setup page Change the “Connection Type” to
“Manual IP Address Ethernet Connection ”
Enter the ATA IP Address from the worksheet into the “IP Address” field, and configure the remaining fields appropriately for
the network When you are done, click OK
Firmware Upgrade
Click the “Advanced” link on the left side of the page and then click on “MP202 Firmware Upgrade ” The current firmware
version will be listed near the top of the page If this is older than 2 6 1_build_2, then a firmware upgrade is necessary Click
“Upgrade Now ”