Christie Digital Systems 38-VIV205-01 - Manual (Page 16)

16
BEFORE OPERATION
TOP CONTROL PANEL AND INDICATORS
Used to open or close
MENU operation. (P17,
18)
MENU BUTTON
IMAGE BUTTON
READY INDICATOR
SELECT BUTTON
POWER ON–OFF BUTTON
INPUT BUTTON
WARNING TEMP. INDICATOR LAMP INDICATOR
POINT (VOLUME + / – ) BUTTONS
LAMP REPLACE INDICATOR
Used to select image
level. (P27, 32)
Lights green when the
projector is ready to be
turned on. And it
flashes green in Power
Management mode.
(P36) Becomes dim when the
projector is turned on.
And bright when the
projector is in stand-by
mode. Turns yellow when the
life of the projection
lamp draws to an end.
(P39) Flashes red when
internal projector
temperature is too
high. (P38)
Used to select the input
source. (P22, 30)
Used to select an item or adjust
value in ON-SCREEN MENU. They
are also used to pan the image in
DIGITAL ZOOM
+/– mode. (P29)
POINT LEFT/RIGHT buttons are
also used as VOLUME +/– buttons.
Used to execute the item
selected. It is also used
to expand/compress the
image in DIGITAL ZOOM
mode. (P29)
Used to turn the projector
on or off. (P19)
Used to adjust zoom.
(P20)
FOCUS BUTTON
Used to adjust focus.
(P20)
ZOOM BUTTON
This projector has CONTROL BUTTONS (TOP CONTROL PANEL) and INDICATORS on its top.
LENS SHIFT BUTTON
Used to select LENS
SHIFT function. (P20)
AUTO PC ADJ. BUTTON
Used to operate AUTO PC
Adjustment function. (P23)